Assalamu Alaikum, how are you all? Come on, you’re doing well because everyone in TrickBD is in a good group!
So all of us computer users, especially PC users, often face a problem that after starting the computer, it starts restarting automatically, or automatically shuts down after 30 minutes. So it is mainly due to some common problems, let’s see what the problems are and what is the solution!
The first problem that causes this is because of the power cable:
The first and most important problem of PC shutting down after a while is due to loose power cable. Check that the power cable you use for your PC’s power supply is loose. The power supply has a cooling fan, when the power cable is loose the cooling fan inside the power supply causes some vibration, causing the power cable to become loose, causing the PC to suddenly shut down or restart while running. Thoroughly scrub the power cable attachment point or replace the power cable if this problem is caused by the power cable.
The problem can also be due to loose collection of power supply:
PCs can also have this problem due to a loose collection of power supplies. Check whether the main cable of the power supply is well connected to the motherboard or whether the 4 pin or 6 pin cable of the power supply is well connected. Also, even if there is a problem with the cooling fan of the power supply, one has to put up with such trouble. Sometimes it can be seen that all the cooling fans inside the PC turn but the cooling fan inside the power supply does not turn, in which case the power supply needs to be changed.
Due to the RAM, the PC can restart again and again:
The second reason and common problem behind the PC shutting down repeatedly can be due to improper installation of RAM or due to the accumulation of dirt in the RAM. Check for rust on the blades that are cut into the RAM. If there is dirt or rust on the pages inside the RAM, then they cannot make a proper connection between the RAM slots, resulting in frequent shutdowns of the PC. If this is the case, clean the ram leaves by rubbing them well with a clean rubber, making sure not to touch the leaves.
This problem can also be caused by the processor:
Processor is a backbone of computer. Computer programs have an auto system that shuts down the PC automatically if the processor overheats. Note that there is dirt between the blades inside the processor. Due to the presence of dirt in the processor, the PC cannot work properly, so after a while the PC restarts or shuts down. If there is any dirt left in the processor, it should be cleaned by gently rubbing it with a clean rubber like RAM.
And the processor must use thermal paste. The aluminum underneath the cooling fan mounted on top of the processor is stuck to the processor. The cooling fan cools the aluminum and the aluminum cools the processor. But if thermal paste is not used in the processor then the processor cannot cool down and the PC shuts down due to overheating. The thermal paste inside the processor must be changed once every 5-6 months with new thermal paste.
Also, the cooling fan on the processor is not rotating properly, the problem of shutting down the PC also occurs. If the cooling fan does not rotate properly, the cooling fan must be replaced with a new cooling fan.
The problem can also be for sata cable:
Another reason for the computer shutting down repeatedly and the monitor display being blank after turning on the PC can be due to the problem of the hard disk line. Removing the SATA cable from the hard drive and cleaning it well, then plugging it in may solve the problem.
Come on, if you follow all these aspects, you will get a solution to the problem very easily. And definitely clean the PC after 1 month or 2 months. It is best to clean the PC with a blower machine so that the PC will be good and the PC will be clean and there will be no problems.
That’s it for today’s post so stay tuned to TrickBD for more great tutorials! thank you
